[grrant1958]

Just fitted my new 3 button Veridian cruise control. Slightly different way to attach using PARTS = 1/ approx 25mm of old handlebar tubing, 2/ handlebar end plug and 3/ 5mm allen bolt & nut approx 35mm long. HOW = Unscrew the switch block and drill a 5mm hole in the top centre of the switch block (be very careful how far the drill goes through). Fit 5mm nut on the inside and screw assembly together. Controller can now be rotated left or right to get best position, plus allows easy access to high/ low switch. Good thing is now controller is close enough to be easily operated without removing hand from handlebars.