[GMTA2023]

So I have ordered and I stalled the Veridian Cruise Control for my Transalp. I figured if I was going to put a post out for the product, I should support them too!
I’ve installed and tested the system and I am Happy to report that it works and functions as advertised. Once the install is completed, I took my bike out and set the cruise and it worked!!
Shuts off with a front or rear brake application or if you twist the throttle or push the cancel button.
tracks the set speed within a kph or two. It is so simple to operate. The soft touch control looks like a factory piece and is unobtrusive located next the throttle and brake/mirror mount. If you tour or travel any long stretches of highway to get to the adventure ride, this makes the highway travel vey pleasant.
A manual throttle lock works as well and is a simple and functional option if you aren’t looking for the automotive style electronic cruise.
installation will take a bit of time as you need to remove all the plastic and lift the tank, but overall not a difficult install. Certainly a nice add on for those that are touring.

Just returned from a 5,500 k road trip and happy with my Veridian cruise. The engine light stayed on for a couple of days but then disappeared apparently randomly not following a TPS reset. Recommend the switch mounting on the left and thinking about the toggle switch (would make the install a lot easier without having to slide the left grip and controls off). Try softening the EP setting in USER mode if using in hill areas.