The deflector kit arrived today. No instructions included but it looks pretty straightforward. Removing the fairings panels was easy enough. Remove the three hex screws that are visible. Pop and remove two black plastic rivits on the front end to seperate from the inner fairing. The edge of the outer fairing also clips over the edge of the inner black fairing. Then pull off gently and the three pin/studs will pull out of their rubber gromits. The lower one connects the black trim beside the engine. The deflector hooks into a slot and is held by double side tape.
![Image]()
![Image]()
![Image]()
This is how you get to the radiator cap.
The smaller screen deflectors just screw on top of the existing screen. Longer bolts were supplied but the originals were okay.
![Image]()
These decals (stickers) were included with the screen deflectors. I couldn't work out where they went.
This is how you get to the radiator cap.
The smaller screen deflectors just screw on top of the existing screen. Longer bolts were supplied but the originals were okay.
These decals (stickers) were included with the screen deflectors. I couldn't work out where they went.
)) anyway nice job buddy
